Risograph Print Care: Hang Your Tattooed Kewpie Art Right
By Bubble Wrapp Toys | Published: 2026-11-02
Category: Tips & Care
A practical step-by-step guide to hanging and caring for A4 risograph prints, using the Tattooed Kewpie and Do No Harm, Take No Shit prints as examples. Keep colors bright and paper flat.
Quick answer
Hang your risograph prints out of direct sunlight, frame them with UV-filtering glazing and an acid-free mat, and keep them in a dry room. That combination prevents the most common fading and waviness issues.
Why risograph ink behaves differently
Risograph prints use soy-based inks that sit on the paper surface rather than soaking deep into it. That gives the distinctive matte, slightly textured look, but it also means the ink is more vulnerable to UV light and moisture than a standard pigment print. The recycled coffee cup paper used in these prints is sturdy but still paper, so it will respond to humidity changes by curling or waving if not supported.
This matters for both the Tattooed Kewpie A4 Risograph Print and the Do No Harm, Take No Shit A4 Risograph Print: their bold areas of color can fade unevenly if one edge gets more sun than another. The steps below focus on blocking light and keeping the sheet flat.
When a simple hang is enough
If you want a low-cost, temporary display, you can skip full framing. Use a UV-filtering acrylic sleeve or a clip frame with an acid-free backing board, and keep the print away from windows. This is fine for a few months, but it offers less protection against dust and moisture than a proper frame. For long-term display, especially in a sunny room, go with full framing and UV glazing.
How to hang and care for your risograph print
- Choose a spot away from direct sun: Pick an interior wall that receives no direct sunlight, or use UV-filtering glazing if the spot gets bright indirect light. A common mistake is hanging opposite a window that gets strong afternoon sun. Check the sun path at different times of day before committing to a spot.
- Frame with acid-free materials: Use an acid-free mat or backing board and UV-filtering glass or acrylic. Avoid mounting the print directly against the glass; leave a small air gap with a mat. A common mistake is using cheap cardboard as backing, which can yellow the paper over time. If budget is tight, prioritize UV glazing over a decorative frame.
- Handle the print by the edges: Risograph ink can scuff if you rub it, so lift the print by opposite corners and avoid touching the printed areas. A common mistake is sliding the print across a table, which can leave scratches. Wash and dry your hands before handling, and avoid lotions that can transfer to the paper.
- Keep humidity steady: Hang the print in a room with stable humidity, away from bathrooms, kitchens, and radiators. A common mistake is hanging near a kettle or steamy shower, which can cause the paper to wave. In damp seasons, use a dehumidifier or move the print to a drier room.
- Dust gently and check monthly: Dust the frame with a dry microfiber cloth; if the print itself is exposed, use a soft brush at low angle. Check for curling edges or color shifts once a month. A common mistake is spraying glass cleaner directly on the frame, which can seep behind the glazing. Note any fading early and move the print out of light immediately.
Product facts
- Tattooed Kewpie A4 Risograph Print: Printed in the UK on 170gsm recycled coffee cup paper. The 170gsm weight is light enough to frame without bulky hardware, but it needs backing support to stay flat.
Tattooed Kewpie A4 Risograph Print - Do No Harm, Take No Shit A4 Risograph Print: A4 risograph print made in the UK on 170gsm recycled coffee cup paper. Same paper and size means the same framing and hanging approach works for both prints.
Do No Harm, Take No Shit A4 Risograph Print
